Deacon Industries, Inc.

Thread Sealants

Deacon Industries Thread Sealants

Paste Sealants | Liquid SealantsPTFE Sealants | Rubber Sealants


PASTE SEALANTS

Deacon 7228
-25°F to 450°F
Paste Sealant. Sets Pliable, Excellent Resistance to Oils, Water, Steam, Di-Ester Type Fluids, Diesel Fuels, Gasoline, Hydrocarbons, and Ethylene Glycol. Trowel on or Caulk.
For use on: Threads, Flanges.
Deacon 770-P
200°F to 950°F
Paste Sealant. Heat Curing Compound, Fibered Peanut Butter Consistency, High Chemical
Tolerance, Trowel on or Caulk.
For use on:Turbine Split Casing, Pump Casing, Boilers: Doors, Stacks, Flanges, Heat Exchangers, Any Metal-to-Metal Joints, Leaking Gaskets, Threaded Fittings, Steam Traps, Sight Glasses, Nuts & Bolts, Gasket Dressings, Segmented Gaskets.
Deacon 4011-P
600°F to 1350°F
Paste Sealant. Heat Curing Compound, Hot Fudge Consistency, High Chemical Tolerance,
Brush on, Trowel on, or Caulk.
For use on: Threads, Flanges, Gasket Dressings, Any Metal-to-Metal Joints.
Deacon 66-P-SS
200°F to 1350°F
Commercial Grade Clean Paste Sealant. Heat Curing Compound, Hot Fudge Consistency, High Chemical Tolerance, Includes Full Batch Analysis Report for Low Melting Point Metals, Halogenated Compounds, Sulfur and its Compounds, Brush on, Trowel on, or Caulk.
For use on: Threads, Flanges, Gasket Dressings, Any Metal-to-Metal Joints.
Deacon 8875-Thin
150°F to 1800°F
Paste Sealant. Heat Curing Compound, Peanut Butter Consistency, Fast-Setting,
High Chemical Tolerance, Trowel on or Caulk.
For use on:Threads, Flanges, Gasket Dressings, Exhaust Systems, Any Metal-to-Metal Joints, Pressure Vessels, Segmented Gaskets.
Deacon Crow-Seal #4022
Ambient to 2000°F
Paste Sealant / Adhesive. Air dries in 1 hr. then a full cure requires gradually increasing the heat to 500°F. Hard setting, Not recommended for Water or Steam.
For use on:Threads, Flanges, Ductwork, Any Metal-to-Metal Joints

back to top



LIQUID SEALANTS

Deacon 770-L
200°F to 950°F
Liquid Sealant. Heat Curing Compound, Honey Consistency, High Chemical Tolerance, Brush on.
For use on:Turbine Split Casing, Pump Casing, Boilers: Doors, Stacks, Flanges, Heat Exchangers, Any
Metal-to-Metal Joints, Leaking Gaskets, Threaded Fittings, Steam Traps, Sight Glasses, Nuts & Bolts, Gasket Dressings, Pressure Vessels, Segmented Gaskets
Deacon 4011
600°F to 1350°F
Liquid Sealant. Heat Curing Compound, Honey Consistency, High Chemical Tolerance, Brush on.
For use on: Threads, Turbine Split Casing, Gasket Dressings, Any Metal-to-Metal Joints.
Deacon 770-L-SS
200°F to 1350°F
Commercial Grade Clean Liquid Sealant. Heat Curing Compound, Honey Consistency, High Chemical Tolerance, Includes Full Batch Analysis Report for Low Melting Point Metals,
Halogenated Compounds, Sulfur and its Compounds, Brush on.
For use on: Threads, Turbine Split Casing, Gasket Dressings, Any Metal-to-Metal Joints.

back to top



TEFLON® SEALANTS

Deacon 275-Chlorine
-50°F to 400°F
Chlorine Grade PTFE Thread Sealant. Chlorine Service, Non-Hardening, Self Lubricating, Corrosion Inhibiting, Non-Seizing, Easy to Apply.
For use on: Threads.
Deacon 375-OXP
-50°F to 400°F
Oxygen Grade PTFE Thread Sealant. Oxygen Service, Non-Hardening, Self Lubricating, Corrosion Inhibiting, Non-Seizing, Easy to Apply.
For use on: Threads.

back to top



RUBBER SEALANTS

Deacon 6328
-50°F to 230°F
2 Part Rubber Sealant. One Hour Cure at 70°F, Remains Flexible, Strong Adhesion,
Good Dielectric Insulator, Excellent Resistance to Gasoline, Solvents, Transformer Oil, Hydrocarbons, Alcohols, Water.
For use on: Threads, Flanges, Gasket Dressings, Void Fill.
Deacon 6329
-60°F to 500°F
2 Part Rubber Sealant. Seven Hour Cure at 70°F, Flexible Solid Cure, Excellent Resistance to Mild Steam, Water, Mineral Oil, Natural Gas, Propane, Acetic Acid.
For use on: Threads, Flanges, Gasket Dressings, Void Fill.

back to top


Teflon® and Kevlar® are registered trademarks of DuPont Corp.


Featured Products

Deacon: The Strongest High Temperature Sealants