|
Deacon Pump 44
Graphite Based Pump Packing (-100ºF to 1000ºF)
Lubricates
and Seals under High Temperature, Remains Pliable, Very Fibrous,
Contains a Non-Melting Synthetic Carrier, Protects Against
Rust and Corrosion,
Resists Seizing and Galling, Minimizes
Friction and Shaft Wear, Excellent Water Resistance.
Rotating
Shafts, Rotary Pumps, Agitators, Stuffing Boxes.
Deacon Pump 77
Non-Staining Pump Packing (-50ºF to 450ºF)
Teflon® Based, Putty-Like Compound, Lubricates
and Seals under High Pressure,
Does Not Harden, Never Needs to be Removed, Minimizes Internal
Surface Wear
and Deterioration,
Excellent Chemical Resistance.
Rotating Shafts, Centrifugal Pumps, Stuffing Boxes, Dryers.
Deacon Pump 88 Food Grade Pump Packing (-50ºF to 450ºF)
Teflon® Based, Food Grade Ingredients, Acts as a Sealant and
Lubricant in Application, Soft and Moldable, High Chemical
Resistance, Minimizes Friction and Wear Normally Created by
Standard Braided Packing, 100% Consumable.
Rotating Shafts, Reciprocating Pumps, Mixers, Stuffing Boxes. Deacon Pump 99 Pump Packing (-50ºF to 450ºF)
Teflon® Fibers and Fillers Add Lubricity and Chemical
Resistance to a
Pliable Base, Seals Under High Pressure, Unique Formulation
Disperses Heat Buildup, Unsurpassed Performance, Minimizes
Downtime,
Conforms to Voids left from Abrasion Wear and Scratches on Shafts
and
Other Moving Parts.
Rotating Shafts, Turbine Pumps, Stuffing Boxes, Refiners.
SPECIALTY MAINTENANCE PRODUCTS
Deacon 427 Two-Part Epoxy (70ºF to 400ºF)
Liquid and Fibered Paste Available, Excellent Chemical
Resistance. Deacon Heat Sink Thick Paste Consistency (Ambient to 1800ºF) Excellent Protection during Soldering, Welding or Brazing. Clean up with water. Deacon Anti-Seize Superior Grade (Ambient to 2000ºF)
Aluminum, Graphite Base, Non-Hardening, Protects in Extreme
Conditions against
Rust, Corrosion and Galling. Deacon C-396 Gasket Release Compound (Ambient to 1800ºF)
Helps Eliminate Gaskets from Sticking and Parts from Galling at
Elevated
Temperatures. Fibered Paste Enhances Seal of Surface
Irregularities. Deacon 20-L Food Grade Grease (10ºF to 470ºF) Pure, Non-Toxic, Multi-Purpose for a Wide Variety of Food Machinery Applications. Meets USDA H-1 and FDA (Fed Reg. 178.3570) Deacon 30-L High-Temp Grease (-20ºF to 400ºF)
Good Adhesion, Thermally Stable, Maintains Consistency.
Anti-Friction Bearings, Crusher Bearings, Steel Mill Roller
Bearings,
Oven Conveyors, High and Low Speed.
Additional Greases Available Upon Request. Specialty Applications. Example: Acid Resistant, Solvent Hydrocarbons. PTFE Joint Sealant (-450ºF to 500ºF) Highly Compressible, Seals Surface Irregularities. Meets FDA Requirements. Adhesive Back. Sizes: 1/8”, 3/16”, 1/4”, 3/8”, 1/2”, and up to 1” Dia. Fiberglass and Ceramic Rope Gasketing Fiberglass:
(1000ºF) Ceramic: (2300ºF) Call with Sizes and Quantity. Pump and Valve Braided Packing Kevlar®, Graphite, Teflon®. 1# and 5# Rolls, Various Sizes Available. Tools and Equipment Safety Equipment (Heat Reflective Clothing, Face Shields ), Tools
(Pneumatic Tools, Injection Guns, Drill Bits and Taps), Wire (Brass, Stainless).
|
Teflon® and Kevlar® are registered trademarks of DuPont Corp.
|
|
 |
