Deacon Industries, Inc.

Flange Sealants / Gasket Dressings

Extruded Gasket Compounds | Paste Sealants | Liquid Sealants
Rubber Sealants


EXTRUDED GASKET COMPOUNDS

Deacon 3100
200°F to 950°F
Extruded Gasket Compound. Pliable Joint Sealant, Cures to a Flexible Leather-Like Consistency, Fully Compressible, Can be Used with a Gasket or Make Your Own Gasket, Fills Surface Defects, High Chemical Resistance.
Sizes: 1/16", 1/8", 3/16", 1/4", 3/8", 1/2", 3/4" diameter.
For use on: Flanges, Gasket Replacement, Access Doors, Heat Exchangers, Boilers, Turbines, Pressure Vessels, Any Metal-to-Metal Joints.
Deacon 3300
600°F to 1600°F
Extruded Gasket Compound. Pliable Joint Sealant, Cures to a Flexible Leather-Like Consistency, Fully Compressible, Can be Used with a Gasket or Make Your Own Gasket, Fills Surface Defects, High Chemical Resistance.
Sizes: 1/4", 3/8", 1/2", 3/4" diameter.
For use on: Flanges, Gasket Replacement, Access Doors, Heat Exchangers, Boilers, Turbines, Pressure Vessels, Any Metal-to-Metal Joints.

back to top


PASTE SEALANTS

Deacon 7228
-25°F to 450°F
Paste Sealant. Sets Pliable, Excellent Resistance to Oils, Water, Steam, Gasoline, and Hydrocarbons. Trowel on or Caulk.
For use on: Threads, Compressors, Valve Cover Gaskets, Wellhead Flanges, Hose Connections, Pump Casings, Mud Motor Threads.
Deacon 770-P
200°F to 950°F
Paste Sealant. Heat Curing Compound, Fibered Peanut Butter Consistency, High Chemical
Tolerance, Trowel on, or Caulk.
For use on: Threaded Fittings, Turbine Split Casing, Pump Casing, Leaking Gaskets, Boilers, Access Doors, Heat Exchangers, Pressure Vessels.
Deacon 4011-P
600°F to 1350°F
Paste Sealant. Heat Curing Compound, Hot Fudge Consistency, High Chemical Tolerance,
Brush on, Trowel on, or Caulk.
For use on: Threaded Fittings, Turbine Split Casing, Pump Casing, Leaking Gaskets, Boilers, Access Doors, Heat Exchangers, Pressure Vessels.
Deacon 66-P-SS
200°F to 1350°F
Commercial Grade Clean Paste Sealant. Heat Curing Compound, Hot Fudge Consistency, High Chemical Tolerance, Includes Full Batch Analysis Report for Low Melting Point Metals, Halogenated Compounds, Sulfur and its Compounds, Brush on, Trowel on, or Caulk.
For use on: Threads, Flanges, Gasket Dressings, Any Metal-to-Metal Joints.
Deacon 8875-Thin
150°F to 1800°F
Paste Sealant. Heat Curing Compound, Peanut Butter Consistency, Fast-Setting,
High Chemical Tolerance, Trowel on or Caulk.
For use on: Threads, Flanges, Access Doors, Turbines, Exhaust Systems, Any Metal-to-Metal Joints, Pressure Vessels, Gasket Dressings.
Deacon 8875
500°F to 1800°F
Paste Sealant. Heat Curing Sealant / Refractory Hybrid, Thick Fibrous Consistency,
Expands in the Presence of Heat, High Chemical Tolerance, Trowel on.
For use on: Flanges (Warped, Cut, Pitted, Irregular), Gasket Dressings, Any Metal-to-Metal Joints.
Deacon Crow-Seal #4022
Ambient to 2000°F
Paste Sealant / Adhesive. Air dries in 1 hr. then a full cure requires gradually increasing the heat to 500°F. Hard setting, Not recommended for Water or Steam.
For use on: Threads, Flanges, Ductwork, Any Metal-to-Metal Joints

back to top


LIQUID SEALANTS

Deacon 770-L
200°F to 950°F
Liquid Sealant. Heat Curing Compound, Honey Consistency, High Chemical Tolerance, Brush on.
For use on: Threaded fittings, Turbine Split Casing, Any Metal to Metal Joints, Pump Casing, Leaking Gaskets, Boilers, Pressure Vessels.
Deacon 4011
600°F to 1350°F
Liquid Sealant. Heat Curing Compound, Honey Consistency, High Chemical Tolerance, Brush on.
For use on: Threaded fittings, Turbine Split Casing, Any Metal to Metal Joints, Pump Casing, Leaking Gaskets, Boilers, Pressure Vessels.
Deacon 770-L-SS
200°F to 1350°F
Commercial Grade Clean Liquid Sealant. Heat Curing Compound, Honey Consistency, High Chemical Tolerance, Includes Full Batch Analysis Report for Low Melting Point Metals,
Halogenated Compounds, Sulfur and its Compounds, Brush on.
For use on: Threads, Turbine Split Casing, Gasket Dressings, Any Metal-to-Metal Joints.

back to top


RUBBER SEALANTS

Deacon 6328
-50°F to 230°F
2 Part Rubber Sealant. One Hour Cure at 70°F, Remains Flexible, Strong Adhesion,
Good Dielectric Insulator, Excellent Resistance to Gasoline, Solvents, Transformer Oil, Hydrocarbons, Alcohols, Water.
For use on: Threads, Flanges, Gasket Dressings, Void Fill.
Deacon 6329
-60°F to 500°F
2 Part Rubber Sealant. Seven Hour Cure at 70°F, Flexible Solid Cure, Excellent Resistance to Mild Steam, Water, Mineral Oil, Natural Gas, Propane, Acetic Acid.
For use on: Threads, Flanges, Gasket Dressings, Void Fill.
Deacon 327-RTV
-60°F to 500°F
Rubber Sealant. Black Flexible Silicone, General Purpose Sealing and Bonding, Gasket Maker, Good Resistance to Vibration, Temperature, Moisture, Weather.
For use on:Joints, Sheet Metal Patches, Access Doors, Duct Work, Cracks, Gaps, Seams.
Deacon 329-RED
-60°F to 600°F
Rubber Sealant. Red Flexible Silicone, General Purpose Sealing and Bonding, Gasket Maker,
Good Resistance to Vibration, Temperature, Moisture, Weather.
For use on:Joints, Sheet Metal Patches, Access Doors, Duct Work, Cracks, Gaps, Seams.


Teflon® and Kevlar® are registered trademarks of DuPont Corp.


Featured Products

Deacon: The Strongest High Temperature Sealants